X-Stream Hand Vac From Nex Flow™

The X-Stream™ Hand Vac is the low cost solution to a variety of industrial housekeeping applications. It is a blow gun, a vacuum gun, a collection system and a transfer system in one simple package.

The X-Stream™ Hand Vac is light weight die cast aluminum and uses less air than a normal blow gun. The amplified air flow is approximately 12 times the air consumption. It draws a vacuum at one end to produce a high vacuum for collection or transfer of materials. It is easily converted from a blow gun into a vacuum gun and back again.

Compressed air enters at point (A) and is allowed to flow into the X-Stream™ Hand Vac using the trigger at point (B). Air either exits at point (C) for blow off or point (C) is a vacuum depending on the setup of the generator inside the Hand Vac. Similarly at point (D), air either enters (in blow off mode) or exits (vacuum mode). The generator inside can be reversed to change mode from blow off to vacuum and back again as required.

 

	Learn More About Maintenance

In blow-off mode, the 1-1/4" (32 mm) diameter allows it to cover a much greater area than a small blow gun for faster cleaning and drying.  It can then also be used to transfer material over a long distance using a vacuum hose which can be supplied.  In vacuum mode, it can be used to vacuum up debris if more appropriate than blowing air, and debris can be collected in a reusable vacuum bag available.

Three systems are available:

Model 36011 - Collection System consists of X-Stream Hand Vac plus reusable collection bag, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.

Model 36012 - Transfer System  consists of X-Stream Hand Vac plus 10 foot (3 m) vacuum hose with cuffs at both ends, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.

Model 36013 - All Purpose System consists of X-Stream Hand Vac plus 10 foot (3 m) vacuum hose with cuffs at both ends, reusable collection bag, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.