Magnetic Filtration From Eclipse Magnetics
|
Easy clean magnetic filters for the removal of magnetic and para-magnetic* contamination from industrial fluids such as oils, lubricants and coolants. Reduce consumable costs, wear and tear on your machinery and improve the finish of your products with minimal operating cost. *Non-magnetic material that can take on some magnetic properties.
Magnetic filtration the Micromag way Micromag is used to remove ferrous or para-magnetic contamination from fluids. The unit is especially effective with machine tool oils and coolants. Re-circulating magnetic particles in any machine tool especially precision grinding applications has many negative effects: Pump, slide way and hydraulic seals wear prematurely Oil and coolant life is massively reduced by bacterial growth, which can be associated with foreign bodies such as metallic particles. In some cases this stops the fluids from performing their critical tasks of cooling and lubricating at the cutting face. Surface finish and component accuracy can also be affected. Cutting wheels need to be to redressed more often, resulting in higher operating costs and reduced profit. Many state of the art machine tools are still being supplied with sub-standard cheap-fix filtration systems which sometimes are no better than expensive strainers. Micromag's high magnetic forces can attract even sub-micron sized particles, ensuring that even the dirtiest of fluids are thoroughly treated prior to use. Micromag is available in three housing sizes 5" & 10" with 1" inlet / outlet ports and a 20" unit with 1" ports. All units are supplied with port adaptors to suit most pipe connection sizes.
Before you consider spending thousands of pounds on your next filtration system, consider Micromag.
Using high performance rare earth magnetic material and proven pole concentrator technology the Filtramag offers an incredible 11,000 Gauss magnetic performance. Filtramag is capable of attracting sub-micron magnetic particles and can be utilised on inline pressure feed lines as well as gravity fed systems. Grinding, honing, lapping, boring & fine detail machining operations will all benefit from the use of this technology. The unit requires no consumables, unlike the more conventional forms of filtration, and has no running costs. Simply install and the Filtramag starts payback straight away. Units are available with port connection sizes of 3/4", 1", 1 1/2" , 2" & 2 1/2" How does Filtramag work? No loss of fluid No line pressure increase No maintenance Sub-micron filtration Easy clean
Magnetic filtration technology for the engineering sector
Incorporating high intensity rare earth magnetic material, pole concentrators and proven magnetic circuit geometry, the rods generate controlled, deep reaching magnetic flux fields which produce a staggering 9,000 Gauss. These flux fields attract and retain any magnetic particles that are suspended in the fluid. The Automag utilises a patented magnetic core shuttle configuration to attract and retain problematic contamination. The system is fully autonomous and can even recycle any collected fluid dispensed during the cleaning purge cycle. The Automag self-cleaning high-intensity magnetic filter will appeal to any precision parts manufacturer who requires continuous 24/7 operation. Recent installations have proved that the system can even remove nuisance abrasives generated by grinding wheels. Units are available that can process 50ltrs-5,000ltrs/min. Operations that will benefit hugely from this system are grinding, honing & lapping. Eclipse also manufacture units that can be manually cleaned. |
Micromag
Filtramag
Automag
 |